Solar Inverter Price-manufacture,factory,supplier from China

Product DetailsThe inverter is designed to stabilize voltage and frequency fluctuations during operation, ensuring consistent performance. It includes built-in protection mechanisms such as overload, short circuit, and over-temperature protection to safeguard against abnormal conditions. Additionally, the inverter features intelligent monitoring to continuously assess the health of the system, transmitting real-time operational data for maintenance and troubleshooting.

Product DetailsThe SCB12-800kVA Dry Transformer is a highly reliable and efficient solution for power distribution, designed without the need for transformer oil, making it especially suitable for indoor and environmentally sensitive applications.Key FeaturesSafe and Flame Retardant:This transformer is pollution-free, explosion-proof, and has a high flame-retardant rating, ensuring it operates safely in a variety of environments.Energy Efficiency:With low loss, minimal noise, and a low temperature rise, the SCB12-800kVA offers significant energy savings, contributing to reduced operational cos

Technical Parameters (Example):Rated Capacity: 500 kVAVoltage Level: Depending on the specific model, generally 10/0.4 kV or similar configurations.Frequency: 50 HzConnection Group: Dyn11 or other specified typesShort Circuit Impedance: Typically less than 6%No-load Loss: Much lower than traditional silicon steel sheet transformersLoad Loss: Also reduced compared to traditional transformersNoise Level: Relatively lowProtection Level: IP23 or higherPlease note that the above parameters are for reference only, and the specifications of the actual product may vary.

Product DetailsThe SCB18-1250kVA Dry Transformer is a highly reliable, safe, and energy-efficient solution for power distribution. Designed without the use of transformer oil, it is particularly well-suited for indoor installations and environmentally sensitive areas, providing both safety and efficiency while minimizing environmental impact.Key FeaturesSafe and Flame Retardant: The SCB18-1250kVA transformer is pollution-free and explosion-proof, offering enhanced protection against fire hazards with its high flame-retardant rating.

Product DetailsThe SCB12-80kVA Dry Transformer is a highly reliable, safe, and efficient solution for power distribution, designed with an oil-free structure.

Product DetailsThe SCB18-1000kVA Dry Transformer is a high-performance, reliable, and safe solution for power distribution. Designed without transformer oil, it is ideal for indoor installations and environmentally sensitive applications, providing an efficient and secure power supply with minimal environmental impact.Key FeaturesSafe and Flame Retardant: The SCB18-1000kVA transformer is pollution-free, explosion-proof, and features a high flame-retardant rating, ensuring safe and secure operation in high-risk environments.

Main FeaturesEnergy-Efficient and Cost-Effective: The use of amorphous alloy materials reduces no-load and load losses, significantly enhancing energy efficiency and lowering operational costs.Safe and Dependable: Manufactured with high-quality insulation materials and equipped with explosion-proof devices, ensuring safe and reliable operation.Low-Noise Operation: The optimized core and winding structure minimize noise during operation, making it suitable for noise-sensitive environments.Exceptional Short-Circuit Resistance: Amorphous alloy materials offer high mechanical strength, enabling th

Main FeaturesEnergy-Efficient and Cost-Effective: Utilizing amorphous alloy materials, this transformer reduces no-load and load losses, improving overall energy efficiency and reducing operational costs.Safe and Dependable: Built with high-quality insulation materials and equipped with explosion-proof devices, ensuring safe and secure operation.Quiet Operation: The optimized core and winding structure significantly lowers noise during operation, creating a quieter environment.High Short-Circuit Resistance: Amorphous alloy materials provide superior mechanical strength, allowing the transforme

Main Features:Energy-efficient and efficient: The use of amorphous alloy materials significantly reduces no-load and load losses, improving the energy efficiency ratio.Safe and reliable: High-quality insulating materials are used, equipped with explosion-proof devices to ensure safe operation.Low noise operation: The core and winding structures are optimized to effectively reduce noise levels during operation.Strong resistance to short circuits: Amorphous alloy materials have high mechanical strength and can withstand large short-circuit current shocks.Compact and lightweight: Small in size an

Main Features:(1) High Efficiency and Energy SavingLow loss design: Amorphous alloy materials have extremely low hysteresis loss and eddy current loss, significantly reducing no-load and load losses, and improving the energy efficiency ratio.Energy-saving effect: Compared with traditional silicon steel sheet transformers, the energy efficiency ratio is significantly improved, and long-term operation can greatly save electricity.(2) Environmental Protection and SafetyInsulation and heat dissipation: High-quality insulating oil or dry design is adopted, with good insulation performance and heat

Product DetailsThe Pole-mounted Transformer is a compact and cost-effective solution designed for pole-mounted installations, particularly in areas with limited infrastructure.

Main Features:Energy-saving and efficient: Utilizing amorphous alloy materials, it significantly reduces no-load and load losses, improving the energy efficiency ratio.Safe and reliable: Using high-quality insulating materials and equipped with explosion-proof devices to ensure safe operation.Low noise operation: Optimizing the core and winding structure effectively reduces the noise level during operation.Strong resistance to short circuits: Amorphous alloy materials have high mechanical strength and can withstand large short-circuit current shocks.Compact and lightweight: Small in size and l

Main Features:High Efficiency and Energy SavingLow Loss Design: Amorphous alloy materials offer extremely low hysteresis and eddy current losses, significantly reducing both no-load and load losses, thereby enhancing energy efficiency.Energy-Saving Benefits: Compared to traditional silicon steel transformers, this transformer offers a marked improvement in energy efficiency, delivering substantial electricity savings during prolonged operation.Environmental Protection and SafetyInsulation and Heat Dissipation: The transformer uses high-quality insulating oil or a dry-type design for excellent

Technical ParametersFeatures:Rated capacity: 200 kVAVoltage level: Customizable according to application needs, for example, 10/0.4 kV, etc.Frequency: 50 Hz or 60 HzConnection group: Typically Dyn11 or other typesShort-circuit impedance: About 4% approximatelyNo-load loss: Considerably reduced compared to traditional silicon steel sheet transformersLoad loss: LowNoise level: Below standard valuesTemperature rise limit: Compliant with relevant national standards requirementsApplicationsThe SBH21-M.RL-200 amorphous alloy transformer is widely used in the following fields:Urban power grid renovat

Technical ParametersCapacity: 1600 kVA (kilovolt-amperes), indicating the transformer's maximum output power.Voltage Levels: Specific values are not provided, but typically include two voltage values for the high-voltage and low-voltage sides.

Technical ParametersKey Indicators:Rated Capacity: 1000 kVA (kilovolt-amperes), indicating the maximum apparent power that the transformer can transmit.Voltage Level: Specific voltage values for both the high-voltage and low-voltage sides are usually provided, such as 10/0.4 kV, etc.Short Circuit Impedance: An important parameter affecting system stability and the magnitude of fault currents.No-Load Loss: The electrical energy consumed by the transformer when there is no load, where amorphous alloy transformers perform exceptionally well.Load Loss: The energy loss when the transformer is opera

Technical ParametersRated Capacity: 1250 kVA (kilovolt-amperes), indicating the maximum apparent power that the transformer can handle.Voltage Level: Specific values are not given, but it typically indicates the operating voltage range of the primary side (input) and secondary side (output).

 Below are some basic technical parameters and applications of this model of transformer:Technical Parameters:Capacity: 100 kVA (specific values may vary slightly depending on the manufacturer)Voltage level: Typically 10/0.4 kV or customized according to user needsFrequency: 50 HzConnection group: Common types include Dyn11, etc.Insulation thermal class: F or aboveEfficiency: Meets the energy efficiency limits and energy-saving evaluation values specified in Chinese National Standard GB 20052Noise level: Below the standard-specified valuesProtection level: IP20 or higherApplications:Civil

Technical Parameters:Rated Capacity: 800 kVA (This refers to the maximum power that the transformer can continuously transmit.)Voltage Level: Specific values for the primary (input side) and secondary (output side) voltages, such as 10/0.4 kV, depending on the actual application needs.Frequency: Usually 50 Hz or 60 Hz, suitable for different national and regional grid standards.No-load Loss: Represents the amount of energy consumed by the transformer when there is no load.Load Loss: The energy consumed by the transformer when operating at full load.Short-circuit Impedance: Reflects the degree

Technical ParametersRated Capacity: 80 kVA (kilovolt-amperes), indicating the maximum power at which the transformer can operate continuously.Voltage Levels: Specific values should be referenced from the product manual or information provided by the manufacturer, typically including the voltage values for the primary side (input) and secondary side (output).No-load Loss: Very low, which is a significant advantage of amorphous alloy transformers, helping to reduce energy waste.Load Loss: Also relatively low, making it more energy-efficient compared to traditional silicon steel sheet transformer

Main Features:High Efficiency and Energy Saving: Utilizing advanced energy-saving technology, it complies with the latest energy efficiency standards, reducing energy consumption and operational costs.Environmental Protection and Safety: Oil-free design eliminates the risks of fire and leakage associated with oil-immersed transformers.Safety and Stability: Possesses excellent overload capacity and short-circuit resistance, ensuring long-term stable operation.Low Noise: Optimized design results in lower operating noise, suitable for locations with high environmental noise requirements.Easy

Main Features:High Efficiency and Energy Saving: Utilizes advanced energy-saving technology, conforms to the latest energy efficiency standards, reduces energy consumption, and lowers operating costs.Environmental Protection and Safety: Oil-free design eliminates the risks of fire and leakage associated with oil-immersed transformers.Safety and Stability: Possesses excellent overload capacity and short-circuit resistance, ensuring long-term stable operation.Low Noise: Optimized design results in lower operating noise, suitable for locations with high environmental noise requirements.Easy Insta

Product DetailsThe Pad-Mounted Transformer is a durable and efficient solution designed for safe and reliable power distribution in various commercial and industrial settings.

Main Features:Energy Efficient: Utilizes the latest energy-saving technology to reduce energy consumption and operating costs.Fully Sealed Design: Effectively prevents internal components from moisture, enhancing the reliability and service life of the equipment.Safe and Stable: Possesses good overload capacity and short-circuit resistance, ensuring long-term stable operation.Low Noise: Adopting optimized design to reduce operating noise, suitable for locations with high environmental noise requirements.Easy Installation: Despite its large size, it is still designed rationally for easy transpo